Indonesian authorities investigate after pornographic film screened on billboard in Jakarta

Monday, October 3, 2016

Authorities in Indonesia initiated an investigation after a pornographic film was illicitly screened on a 24-square-meter (roughly 260-square-foot) LED billboard in the capital city of Jakarta on Friday, in full view of rush hour commuters.

The film, depicting a couple engaged in explicit sexual activity, appeared on the screen for several minutes — five, according to BBC News — during which time passerby took the opportunity to film the display and upload it onto the Internet. Following complaints to the South Jakarta Communications and Information Agency, authorities cut power to the billboard at about 2:45 p.m. to stop the screening.

According to a report on Saturday by Agence France-Presse, the film, identified as Japanese erotica titled Watch Tokyo Hot, was believed to have been transmitted to the billboard by a personal computer. Awi Setiyono, head of public relations for the police, said the investigative team for the incident includes a cyber crime unit, with the intention of determining whether the billboard was hacked.

Lestari Ady Wiryono, head of public information for South Jakarta, stated “The South Jakarta administration takes this matter seriously”. She said on Friday she had no information on the culprits or the source of the film. “We received the report and we immediately severed the electricity to there”, she said according to the Daily Mirror.

The billboard, located in close proximity to the office of the South Jakarta mayor, is owned by PT. Matapena Komunika Advertama, a private company, while content screened on it is the responsibility of PT. Transito Adiman Jati Transito Adverstising, according to The Jakarta Post. According to Lestari, following the incident, staff from her office along with the investigating cyber crime unit visited PT. Transito’s offices to gather information relating to the affected billboard.

The Indonesian government blocks access to pornographic websites in the country, whilst also subjecting scenes of romance in public broadcasts to heavy censorship. Under a 2015 decree, the government subjects content shown on billboards to standards of “public ethics, aesthetics, public order, decency, security and the environment”.

Categories Uncategorized

Seo.Cc Sponsors The 2009 Sfima Nautical Networking Event (Nne)}

SEO.cc Sponsors the 2009 SFIMA Nautical Networking Event (NNE)

by

Jason Ibarra

Fort Lauderdale, FL – October 19, 2009 – Search Engine Operator – SEO.cc an active SFIMA member and South Florida headquartered search engine marketing and interactive marketing agency is proud to announce its third consecutive sponsorship of the SFIMA Nautical Networking Event.

About Search Engine Operator – SEO.cc

Headquartered in the Las Olas District of Fort Lauderdale, FL SEO.cc is a client-centric South Florida interactive marketing agency. With its roots in search engine marketing and ROI driven results SEO.cc works closely with ‘best in breed’ strategic partners to provide its clients with fully-encompassed online marketing strategies.

Search Engine Operator’s past SFIMA sponsorships include:

-2007 SFIMA Nautical Networking Event (NNE) – Marketeritaville

[youtube]http://www.youtube.com/watch?v=vX64KNaNEaM[/youtube]

-2008 SFIMA Charity Casino – A Night In Monte Carlo

-2008 SFIMA Nautical Networking Event (NNE) – Rock the Boat

-2008 SFIMA Holiday Event – SFIMA Holiday Wine Party and Guru Bars

-2009 SFIMA Event – Using Search to Beat the Economic Blues

About the 2009 SFIMA Nautical Networking Event (NNE)

Setting sail aboard the 170 ft. Lady Windridge Yacht from the Tranquility Marina in Fort Lauderdale, FL on October 23, 2009, the SFIMA NNE is themed “Unmasking Your Potential”.

With an expected turn out of over 400 SFIMA members and interactive marketers from around the world the 2009 SFIMA Nautical Networking Event will be the place to meet innovative market leaders in today’s world of interactive marketing and business development. As always the SFIMA NNE will host networking games, music, dancing and entertainment along with hors d’oeuvres, open top-shelf bar and a dinner buffet.

Upon disembarking the Lady Windridge at 10:30 pm SFIMA’s guests will gather again for the SFIMA NNE After Party.

About SFIMA – The South Florida Interactive Marketing Association

Through monthly educational seminars and annual charity networking events SFIMA hosts an open platform for interactive marketers and businesses to connect. After being founded by Sheryl Cattell in 2003 SFIMA has quickly grown to hundreds of members through the hard work and dedication of board members, volunteers and event sponsors.

SFIMA’s strong connections and large following give it the leverage to present industry leaders and game changing case studies to its members in the monthly educational seminars held at local South Florida hotels like the Fort Lauderdale Beach W and the Las Olas Riverside Hotel. SFIMA also coordinates and hosts the Annual SoFIE Awards (South Florida Interactive Excellence Awards) and the Annual iHack Golf Tournament.

SFIMA has a lot planned in 2009 aside from the legendary 2009 NNE and the lineup includes:

Reshaping Marketing with Video & Social Media: Keynote speaker Jessica Kizorek will present to SFIMA attendees the latest trends in online video, branding and social media marketing.

Wine Social and Guru Bar: Hosted at the Seventh Street Wine Company the SFIMA Wine Social and Guru Bar is often referred to as the SFIMA Holiday Party. In this annual gathering SFIMA members and guest socialize while experiencing a variety of fine wines from around the world.

Those interested in tapping into the education and opportunity present by SFIMA can attend an event as a onetime attendee, enroll into SFIMA as an Annual Individual SFIMA Member, participate as a company with a SFIMA Annual Corporate Membership (3 or 5 seats) and contribute via sponsorships like the 2009 SFIMA Nautical Networking Event (NNE).

Jason Ibarra is the Director of Business Development at SEO.cc. His creative mindset puts him on the forefront of SEO.cc’s Business Development and Strategic Planning. He applies this experience to further ensure the success of

SEO.cc

and its clients.

Article Source:

eArticlesOnline.com

}

Semapedia introduced to Africa: Powered by “Made in Ghana” technology

This article mentions the Wikimedia Foundation or one of its projects. Please note that Wikinews is a project of the Wikimedia Foundation. Semapedia is not associated with the Wikimedia Foundation.

Friday, April 7, 2006

Accra — The Ghana-India Kofi Annan Centre for Excellence in ICT introduced the Semacode technology and the Semapedia application to a segment of the Ghanaian public in a presentation delivered by Guido Sohne, Developer-In-Residence at the Centre and Chief Software Architect of CoreNett Ltd, a Ghanaian electronic transaction processing company.

Introduced for the first time in Africa, Semapedia is a way of associating Internet sites with physical barcodes that can be read by cameraphones, enabling one to look up information about physical objects quickly and easily.

Contents

  • 1 The Semacode technology
  • 2 Semapedia, the physical Wikipedia
  • 3 Made in Ghana
  • 4 Bringing Semapedia to Africa
  • 5 Sources
Categories Uncategorized

CanadaVOTES: Liberal David Remington running in Lanark—Frontenac—Lennox & Addington

Friday, September 19, 2008

On October 14, 2008, Canadians will be heading to the polls for the federal election. Liberal candidate David Remington is standing for election in the riding of Lanark—Frontenac—Lennox and Addington.

Wikinews contacted David Remington, to talk about the issues facing Canadians, and what they and their party would do to address them. Wikinews is in the process of contacting every candidate, in every riding across the country, no matter their political stripe. All interviews are conducted over e-mail, and interviews are published unedited, allowing candidates to impart their full message to our readers, uninterrupted.

Categories Uncategorized

CanadaVOTES: Liberal Andrew Lang running in Toronto—Danforth

Saturday, September 27, 2008

On October 14, 2008, Canadians will be heading to the polls for the federal election. Liberal candidate Andrew Lang is standing for election in the riding of Toronto—Danforth.

Raised with Liberal values, Andrew attended his first Liberal rally at age 6. He has worked 18 elections since that introduction to the political sphere, but this is his first time as a candidate. A University of Toronto graduate (and player for the Varsity Blues), his career highlights include managing Bill Graham’s constituency office. (A now-retired MP, Graham’s career included serving as Minister of National Defence and Minister of Foreign Affairs, as well as interim Leader of the Liberals and Leader of the Opposition.) He is currently with the Ontario Chiropractic Association.

Wikinews contacted Andrew, to talk about the issues facing Canadians, and what they and their party would do to address them. Wikinews is in the process of contacting every candidate, in every riding across the country, no matter their political stripe. All interviews are conducted over e-mail, and interviews are published unedited, allowing candidates to impart their full message to our readers, uninterrupted.

The incumbent in this riding is National Democratic Party (NDP) leader Jack Layton. Other than Lang, trying for the riding are Sharon Howarth (Green), and Christina Perreault (Conservative). Minor party candidates Marie Crawford (Animal Alliance Environment Voters Party of Canada), Marcell Rodden (Marxist-Leninist), and Bahman Yazdanfar (Canadian Action Party) are also running, as is independent John Richardson. The riding has existed federally since 1979, and has the seat has been occupied by Bob Rae (NDP, 1979–1982), Lynn McDonald (NDP, 1982–1988), Dennis Mills (Liberal, 1988–2004), and Layton (NDP, 2004 to present).

For more information, visit the campaign’s official website, listed below.

Categories Uncategorized

Shed Blueprints Build Your Own Garden Shed}

Shed Blueprints – Build Your Own Garden Shed

by

Angel Luke

Have you made up your mind to construct your own storage shed using shed blueprints? A storage shed can be a great addition to any home. It is important to have some extra space for storing all your tools and machines. A shed will keep your equipment safe and prevent them from getting in your way during daily activities.

Building a wooden storage shed can be a fun and challenging activity which will help to sharpen you woodworking skills. Constructing your own shed is definitely better than buying a pre-built shed or assembling a shed from a kit. Both of these will cost you a lot more compared to building your own shed from shed blueprints

. Also you won’t necessarily be able to find the kit for a shed which exactly matches your needs. If you build your own shed you can make it just the way you like it.

Like other building projects, your shed project will begin with a shed plan. You can either draw the plans for the shed yourself or you can you can buy professional shed blueprints. You can also find shed plans for free in many woodworking magazines or on the internet. No matter how you get the shed building plans, finding the right plans is very essential to ensure that your shed will stand the test of time. A well planned out shed is a pleasure to build, can be built within your budget and it will withstand the elements of nature for many years.

After you have acquired proper shed building blueprints, the next vital step is to get the building materials. To get the best quality timber at the lowest price, you will need to ask around in your neighboring hardware stores and timber yards. This will give you an idea on how you can get the best bargain price on lumber.

Next, you need to select the exact spot where you will build the shed. Check that the soil is dry and the ground is level. Don’t pick a sport where water gets collected during rains. This will cause your shed foundation to decay and reduce the stability of the structure. Make sure there are no underground pipelines or cables beneath the land you selected to locate your shed.

Check with your local building council if you need any building permit to build your shed. This is especially necessary when you are planning on building a large shed. Different areas have different regulations and building codes. Make sure you follow all the rules and regulations.

Now it’s time to collect all the tools and building materials and get to work. Check that you have all the nails and screws that will be needed during construction, close at hand. Lay down a concrete foundation to give a solid base to the shed. This will also protect the wood in the shed floor from moisture. Leave the concrete to dry at least for a day before you begin construction.

Secure the four foundation posts at the four corners firmly into the ground and hold them with temporary braces. Pour concrete around the foundation posts and leave it to dry. Once the posts are secured in place you can start work on the wall frame.

Use pressure treated wood for the wall plates and joists to give your shed extra strength and protection against weather. Give special attention when building the roof. Make sure to make it weather proof and add gutters for carrying water away from your shed.

Here are some free

shed blueprints

and

garden shed blueprints

to help you start building your shed.

Article Source:

eArticlesOnline.com

}

Apple launches 3G iPhone

Monday, June 9, 2008

Apple Computer today launched a 3G version of its iPhone device. Steve Jobs, the Apple Chief Executive Officer, announced the development at a developers’ conference, where he promoted the iPhone by saying that, “just one year after launching the iPhone, we’re launching the new iPhone 3G that is twice as fast at half the price.”

Apple has claimed that the 3G iPhone will provide internet access at double the speed of the internet access provided by the previous versions.

The price for the iPhone has also been reduced to $199 in the US, with prices in other countries equal or below that of within the US.

For several months there has been speculation among Apple fans about the launch of a 3G iPhone.

Categories Uncategorized

Buildings Ventilation Method

Buildings Ventilation Method

by

Oleg Tchethel

Underground parking garages require ventilation to remove harmful vehicle emissions and other pollutants, while providing fresh air. Ventilation is also a requirement in the event of a fire to remove smoke and to provide a clear access for firefighters. Exhaust and supply fans are used in conjunction with ductwork to distribute air throughout the parking garage, providing a common system for both pollution and smoke control. Tenderall Fan manufactures a complete line of axial flow fans designed for parking garage ventilation systems. Restroom exhaust fans are primarily used to reduce moisture and prevent mold buildup. As restrooms typically occupy a small space, restroom exhaust fans are considered low volume and generally provide 2 to 5 air exchanges per minute. These fans are mounted on the roof or in-line with the system s ductwork. Tenderall Fan offers a full line of centrifugal roof & wall exhausters, inline centrifugal fans, and ceiling & cabinet ventilators to accommodate all restroom requirements and exhaust applications.

Energy recovery systems have become a popular way to heat and cool homes as well as commercial buildings. Energy recovery applications typically use two fans that provide air through a heat exchanger that treats the air by heating or cooling it before it enters the building. Tenderall Fan s plenum and forward curved fans are typically used for energy recovery applications and offer a wide range of performance and flexibility. Generator rooms require a wide range of fans to optimize the performance of generators and other equipment. Exhaust fans are used to prevent heat buildup within the generator room, while supply fans are used to provide fresh air for combustion and efficient generator performance. Room size, space limitations, and mounting capabilities will determine the exact type of fan needed for each specific application. As a leading manufacturer of air moving equipment, Buffalo Blower offers numerous fan types for meeting any generator room specification.

[youtube]http://www.youtube.com/watch?v=UpfoCWFb_LA[/youtube]

Elevator shafts require proper air moving equipment to provide smoke control in the event of a fire. Pressurization is used to prevent smoke from migrating through elevator shafts to other floors, similar to how fans are used to control smoke in stairwells. Today s elevator pressurization systems are designed to allow elevators to be used by firefighting teams. However, some systems are designed for the evacuation of handicapped individuals. While small amounts of smoke in an elevator may be tolerated by firefighters, smoke in an elevator and its entry and exit paths is unacceptable. Buffalo Blower s complete offering of smoke and heat exhaust fans are relied upon for elevator shaft exhaust/pressurization in emergency situations. Jet bridges are hallways used by passengers to board commercial airplanes. While these bridges are portable and movable, their continuous use requires an exhaust fan or gravity ventilator to prevent air from becoming stagnant. Fans and ventilators draw air into the bridge from the terminal and through the exit which is then exhausted through a fan or ventilator. Twin City Fan provides a number of centrifugal roof exhausters and gravity relief ventilators for jet bridge exhaust applications.

Rooftop exhaust fans are designed to remove heat and odors from buildings to improve air quality and occupant comfort. Areas such as cafeterias, locker rooms, office spaces, restrooms and warehouses often have unique requirements specified by local codes and utilize a wide range of rooftop exhaust fans. To accommodate these various types of environments and ventilation systems, Tenderall Fan offers a complete line of products to support every rooftop exhaust application. These applications can range from clean airstreams with minimal filtration all way to high density offices and health care facilities that must comply with extremely stringent regulations. Gravity ventilators are used to equalize a building s positive or negative pressure created by other fans in the system. These ventilators provide natural ventilation and are used for intake and relief applications. Tenderall Fan offers both spun aluminum and hooded ventilators, featuring a low silhouette for low roof-lines. Louvered penthouse ventilators are available when aesthetics are not an important factor and feature extruded aluminum louvers. Sidewall exhaust and supply applications require panel fans to move large volumes of air at low static pressures. Panel fans are commonly used on the walls of warehouses and manufacturing facilities to supply outside air or to remove hot or noxious gases in exhaust configurations. Other typical applications include removing carbon dioxide from produce storage facilities, greenhouse ventilation, and parking garages. Panel fans can be mounted directly to the wall panel, which is especially useful when ductwork is unnecessary. Each fan can be customized to the individual needs of the customer, including aluminum or stainless steel construction, explosion proof motors, gravity or motorized dampers, corrosion resistant coatings, and fully reversible propellers.

Indoor swimming pools require air moving equipment for exhausting moisture-laden, corrosive and chlorinated air. Fans and duct systems must be designed to withstand these elements. That is why Buffalo Blower offers a wide selection of fans and construction materials, including fiberglass, alloys, and specialty coatings to prevent the potential corrosion associated with these environments.

Ventilation is a crucial component for any mining operation. Inadequate ventilation can expose miners to high levels of dangerous gases, dust particulates, and excessive heat. The consequences of prolonged exposure to these elements can pose a series of health related complications. We understand the significance of selecting the right ventilation equipment for maximizing the air quality in mines, which is why Buffalo Blower offers a comprehensive line of products suited for the most rigorous mining ventilation applications. We also offer many special design features such as non sparking units, explosion proof motors and specialty guards. Stairwells are frequently the primary escape route in the event of a fire emergency and may also serve as the primary access route for firefighting teams. In these smoke control zones, fans are used to pressurize stairwells to limit smoke infiltration by maintaining positive pressure across closed stairwell doors. Fans used for stairwell pressurization are designed to operate at low enough pressures so that doors can be safely opened during evacuation. Because occupant safety is the most important aspect when facing a fire emergency, Buffalo Blower offers a complete line of smoke and heat exhaust fans designed for stairwell pressurization.

Service stations require vehicle exhaust systems to maintain indoor air quality for customers and employees. These systems attach to a vehicle s exhaust pipe to draw hazardous emissions out of the building. The fans used in these systems are attached to small hose and must be capable of producing high pressures due to the air velocity required to exhaust the fumes. Tenderall Fan offers a wide selection of compact pressure blowers and radial bladed fans capable of meeting the high pressures requirements of vehicle exhaust systems.

For additional information please refer to http://tenderall.com/blower/index.htmlTenderall Fan Co.Industrial Fan and Blower Engineersnisco@globalserve.nethttp://www.tenderall.com/contact/index.htmlhttp://www.tenderall.com/hvac/index.html

Article Source:

ArticleRich.com

Christina Grimmie killed by ‘infatuated’ fan; Orlando police close case

Friday, June 24, 2016

The man who murdered Christina Grimmie following a June 10 concert lived “like a hermit” and had apparently never met the singer, but was infatuated with her and had spent recent months changing his appearance in an effort to win her over, according to information released on Wednesday by police in Orlando, Florida.

Kevin James Loibl, age 27, took a taxicab to Orlando on June 9 from his St. Petersburg home, bringing along two 9mm Glock handguns and extra ammunition. He spent that night in a hotel. Following Grimmie’s June 10 performance at The Plaza Live, he approached her as she signed autographs and opened fire, shooting her in the head once and the torso three times. Grimmie’s brother Marcus then tackled Loibl, who broke free, backed against a wall, and killed himself with a single shot to the head.

Christina Grimmie was pronounced dead at Orlando Regional Medical Center just before 11:00 p.m. She was buried in a private ceremony in her hometown in New Jersey on June 16. A public memorial in nearby Medford attracted thousands of family, friends and fans.

Police interviewed several of Loibl’s co-workers including Cory Dennington, self-described as Loibl’s “only friend in the world”, who said Loibl had an unrealistic infatuation with her and was constantly watching her videos and monitoring her online activity. Dennington said Loibl had lost weight, whitened his teeth, and gotten eye and hair surgery in an effort to look better for Grimmie, whom he considered his “soul mate”. Loibl would get defensive when told hoping for a relationship with the singer was “illogical”.

Witnesses also said Loibl had not mentioned attending Grimmie’s Orlando concert, and none of them knew of any threats. His father and brother did not know Loibl owned any guns, police said. Each weapon was purchased legally at one of two St. Petersburg gun shops.

Investigators were unable to crack the encryption on Loibl’s phone, and it appeared he had destroyed his computer’s hard drive. Police believe Loibl acted alone and, since he is deceased, they closed their case on Wednesday. They offered no motive for the shooting.

Categories Uncategorized

Volunteers and food needed for flooded Manitoba, Canada

Tuesday, March 31, 2009

Local municipal and provincial volunteers in Manitoba, Canada are exhausted in their efforts to divert the rising waters of the Red River of the North.

It has been hard work with little sleep for the residents who live on the shores of the Red River to shore up their defences with sandbags, build dikes, clear frozen culverts and break ice jams

Volunteers to spell relief for local volunteers and food are desperately needed.

“It’s a week now we’ve been doing this … you’re talking four, five, six public works guys. In my one community we’ve got 25 volunteer firefighters and those guys have been going 24/7, so of course it’s wearing them down.” said Paul Guyader, Manitoba’s emergency measures coordinator.

“We’re dealing with one of the biggest floods the province has ever seen,” said Steve Strang, mayor of St. Clements, Manitoba “We’ve put out hundreds of thousands of bags already. The municipalities are working very well, we’re working with the provincial government, we’ve brought in every possible resource we could to address this issue. The volunteerism within the community has been phenomenal.”

The Portage Diversion has taken some spring waters from the Assiniboine River and diverted the flow to Lake Manitoba.

Roseau River Anishinabe First Nation has been totally evacuated, as well as many homes near the Canada – United States border.

The cold weather is freezing the ice jams into place. Guyader has had 2 Amphibex Excavators operating on the river breaking up ice.

The Red River is right now 16.7 feet (5 metres) above spring ice conditions. The Red River Floodway gates cannot be opened with the current ice jams.

“If we operate now, we can get ice jamming going into the floodway, jamming up against the St. Mary’s bridge, as such, the floodway capacity would be reduced and would cause higher water levels in the city of Winnipeg.” said Steve Topping, Manitoba Water Stewardship spokesman

The floodway was constructed in 1968 following the 1950 flood to divert the overflow spring flooding waters of the Red River. The floodway has been widened the since the 1997 “flood of the century” and the expansion is expected to be completed this spring. As well Manitoba built permanent dikes around communities within the flood plain since the last two major floods..

The Red River waters will crest between the beginning of April to mid April, at which time also the weather should be warming up. Communities are bracing for higher water levels, more ice jams as well as melting snow in the warmer spring temperatures.

Categories Uncategorized