best-car-wallpapers.com

CanadaVOTES: Liberal David Remington running in Lanark—Frontenac—Lennox & Addington

December 16, 2016December 16, 2016 by

Friday, September 19, 2008

On October 14, 2008, Canadians will be heading to the polls for the federal election. Liberal candidate David Remington is standing for election in the riding of Lanark—Frontenac—Lennox and Addington.

Wikinews contacted David Remington, to talk about the issues facing Canadians, and what they and their party would do to address them. Wikinews is in the process of contacting every candidate, in every riding across the country, no matter their political stripe. All interviews are conducted over e-mail, and interviews are published unedited, allowing candidates to impart their full message to our readers, uninterrupted.

CanadaVOTES: Liberal Andrew Lang running in Toronto—Danforth

December 16, 2016December 16, 2016 by

Saturday, September 27, 2008

On October 14, 2008, Canadians will be heading to the polls for the federal election. Liberal candidate Andrew Lang is standing for election in the riding of Toronto—Danforth.

Raised with Liberal values, Andrew attended his first Liberal rally at age 6. He has worked 18 elections since that introduction to the political sphere, but this is his first time as a candidate. A University of Toronto graduate (and player for the Varsity Blues), his career highlights include managing Bill Graham’s constituency office. (A now-retired MP, Graham’s career included serving as Minister of National Defence and Minister of Foreign Affairs, as well as interim Leader of the Liberals and Leader of the Opposition.) He is currently with the Ontario Chiropractic Association.

Wikinews contacted Andrew, to talk about the issues facing Canadians, and what they and their party would do to address them. Wikinews is in the process of contacting every candidate, in every riding across the country, no matter their political stripe. All interviews are conducted over e-mail, and interviews are published unedited, allowing candidates to impart their full message to our readers, uninterrupted.

The incumbent in this riding is National Democratic Party (NDP) leader Jack Layton. Other than Lang, trying for the riding are Sharon Howarth (Green), and Christina Perreault (Conservative). Minor party candidates Marie Crawford (Animal Alliance Environment Voters Party of Canada), Marcell Rodden (Marxist-Leninist), and Bahman Yazdanfar (Canadian Action Party) are also running, as is independent John Richardson. The riding has existed federally since 1979, and has the seat has been occupied by Bob Rae (NDP, 1979–1982), Lynn McDonald (NDP, 1982–1988), Dennis Mills (Liberal, 1988–2004), and Layton (NDP, 2004 to present).

For more information, visit the campaign’s official website, listed below.

Shed Blueprints Build Your Own Garden Shed}

May 10, 2018December 15, 2016 by

Shed Blueprints – Build Your Own Garden Shed

Angel Luke

Have you made up your mind to construct your own storage shed using shed blueprints? A storage shed can be a great addition to any home. It is important to have some extra space for storing all your tools and machines. A shed will keep your equipment safe and prevent them from getting in your way during daily activities.

Building a wooden storage shed can be a fun and challenging activity which will help to sharpen you woodworking skills. Constructing your own shed is definitely better than buying a pre-built shed or assembling a shed from a kit. Both of these will cost you a lot more compared to building your own shed from shed blueprints

. Also you won’t necessarily be able to find the kit for a shed which exactly matches your needs. If you build your own shed you can make it just the way you like it.

Like other building projects, your shed project will begin with a shed plan. You can either draw the plans for the shed yourself or you can you can buy professional shed blueprints. You can also find shed plans for free in many woodworking magazines or on the internet. No matter how you get the shed building plans, finding the right plans is very essential to ensure that your shed will stand the test of time. A well planned out shed is a pleasure to build, can be built within your budget and it will withstand the elements of nature for many years.

After you have acquired proper shed building blueprints, the next vital step is to get the building materials. To get the best quality timber at the lowest price, you will need to ask around in your neighboring hardware stores and timber yards. This will give you an idea on how you can get the best bargain price on lumber.

Next, you need to select the exact spot where you will build the shed. Check that the soil is dry and the ground is level. Don’t pick a sport where water gets collected during rains. This will cause your shed foundation to decay and reduce the stability of the structure. Make sure there are no underground pipelines or cables beneath the land you selected to locate your shed.

Check with your local building council if you need any building permit to build your shed. This is especially necessary when you are planning on building a large shed. Different areas have different regulations and building codes. Make sure you follow all the rules and regulations.

Now it’s time to collect all the tools and building materials and get to work. Check that you have all the nails and screws that will be needed during construction, close at hand. Lay down a concrete foundation to give a solid base to the shed. This will also protect the wood in the shed floor from moisture. Leave the concrete to dry at least for a day before you begin construction.

Secure the four foundation posts at the four corners firmly into the ground and hold them with temporary braces. Pour concrete around the foundation posts and leave it to dry. Once the posts are secured in place you can start work on the wall frame.

Use pressure treated wood for the wall plates and joists to give your shed extra strength and protection against weather. Give special attention when building the roof. Make sure to make it weather proof and add gutters for carrying water away from your shed.

Here are some free

shed blueprints

and

garden shed blueprints

to help you start building your shed.

Article Source:

eArticlesOnline.com

}

Apple launches 3G iPhone

December 15, 2016December 15, 2016 by

Monday, June 9, 2008

Apple Computer today launched a 3G version of its iPhone device. Steve Jobs, the Apple Chief Executive Officer, announced the development at a developers’ conference, where he promoted the iPhone by saying that, “just one year after launching the iPhone, we’re launching the new iPhone 3G that is twice as fast at half the price.”

Apple has claimed that the 3G iPhone will provide internet access at double the speed of the internet access provided by the previous versions.

The price for the iPhone has also been reduced to $199 in the US, with prices in other countries equal or below that of within the US.

For several months there has been speculation among Apple fans about the launch of a 3G iPhone.

Buildings Ventilation Method

November 29, 2018December 14, 2016 by

Buildings Ventilation Method

Oleg Tchethel

Underground parking garages require ventilation to remove harmful vehicle emissions and other pollutants, while providing fresh air. Ventilation is also a requirement in the event of a fire to remove smoke and to provide a clear access for firefighters. Exhaust and supply fans are used in conjunction with ductwork to distribute air throughout the parking garage, providing a common system for both pollution and smoke control. Tenderall Fan manufactures a complete line of axial flow fans designed for parking garage ventilation systems. Restroom exhaust fans are primarily used to reduce moisture and prevent mold buildup. As restrooms typically occupy a small space, restroom exhaust fans are considered low volume and generally provide 2 to 5 air exchanges per minute. These fans are mounted on the roof or in-line with the system s ductwork. Tenderall Fan offers a full line of centrifugal roof & wall exhausters, inline centrifugal fans, and ceiling & cabinet ventilators to accommodate all restroom requirements and exhaust applications.

Energy recovery systems have become a popular way to heat and cool homes as well as commercial buildings. Energy recovery applications typically use two fans that provide air through a heat exchanger that treats the air by heating or cooling it before it enters the building. Tenderall Fan s plenum and forward curved fans are typically used for energy recovery applications and offer a wide range of performance and flexibility. Generator rooms require a wide range of fans to optimize the performance of generators and other equipment. Exhaust fans are used to prevent heat buildup within the generator room, while supply fans are used to provide fresh air for combustion and efficient generator performance. Room size, space limitations, and mounting capabilities will determine the exact type of fan needed for each specific application. As a leading manufacturer of air moving equipment, Buffalo Blower offers numerous fan types for meeting any generator room specification.

[youtube]http://www.youtube.com/watch?v=UpfoCWFb_LA[/youtube]

Elevator shafts require proper air moving equipment to provide smoke control in the event of a fire. Pressurization is used to prevent smoke from migrating through elevator shafts to other floors, similar to how fans are used to control smoke in stairwells. Today s elevator pressurization systems are designed to allow elevators to be used by firefighting teams. However, some systems are designed for the evacuation of handicapped individuals. While small amounts of smoke in an elevator may be tolerated by firefighters, smoke in an elevator and its entry and exit paths is unacceptable. Buffalo Blower s complete offering of smoke and heat exhaust fans are relied upon for elevator shaft exhaust/pressurization in emergency situations. Jet bridges are hallways used by passengers to board commercial airplanes. While these bridges are portable and movable, their continuous use requires an exhaust fan or gravity ventilator to prevent air from becoming stagnant. Fans and ventilators draw air into the bridge from the terminal and through the exit which is then exhausted through a fan or ventilator. Twin City Fan provides a number of centrifugal roof exhausters and gravity relief ventilators for jet bridge exhaust applications.

Rooftop exhaust fans are designed to remove heat and odors from buildings to improve air quality and occupant comfort. Areas such as cafeterias, locker rooms, office spaces, restrooms and warehouses often have unique requirements specified by local codes and utilize a wide range of rooftop exhaust fans. To accommodate these various types of environments and ventilation systems, Tenderall Fan offers a complete line of products to support every rooftop exhaust application. These applications can range from clean airstreams with minimal filtration all way to high density offices and health care facilities that must comply with extremely stringent regulations. Gravity ventilators are used to equalize a building s positive or negative pressure created by other fans in the system. These ventilators provide natural ventilation and are used for intake and relief applications. Tenderall Fan offers both spun aluminum and hooded ventilators, featuring a low silhouette for low roof-lines. Louvered penthouse ventilators are available when aesthetics are not an important factor and feature extruded aluminum louvers. Sidewall exhaust and supply applications require panel fans to move large volumes of air at low static pressures. Panel fans are commonly used on the walls of warehouses and manufacturing facilities to supply outside air or to remove hot or noxious gases in exhaust configurations. Other typical applications include removing carbon dioxide from produce storage facilities, greenhouse ventilation, and parking garages. Panel fans can be mounted directly to the wall panel, which is especially useful when ductwork is unnecessary. Each fan can be customized to the individual needs of the customer, including aluminum or stainless steel construction, explosion proof motors, gravity or motorized dampers, corrosion resistant coatings, and fully reversible propellers.

Indoor swimming pools require air moving equipment for exhausting moisture-laden, corrosive and chlorinated air. Fans and duct systems must be designed to withstand these elements. That is why Buffalo Blower offers a wide selection of fans and construction materials, including fiberglass, alloys, and specialty coatings to prevent the potential corrosion associated with these environments.

Ventilation is a crucial component for any mining operation. Inadequate ventilation can expose miners to high levels of dangerous gases, dust particulates, and excessive heat. The consequences of prolonged exposure to these elements can pose a series of health related complications. We understand the significance of selecting the right ventilation equipment for maximizing the air quality in mines, which is why Buffalo Blower offers a comprehensive line of products suited for the most rigorous mining ventilation applications. We also offer many special design features such as non sparking units, explosion proof motors and specialty guards. Stairwells are frequently the primary escape route in the event of a fire emergency and may also serve as the primary access route for firefighting teams. In these smoke control zones, fans are used to pressurize stairwells to limit smoke infiltration by maintaining positive pressure across closed stairwell doors. Fans used for stairwell pressurization are designed to operate at low enough pressures so that doors can be safely opened during evacuation. Because occupant safety is the most important aspect when facing a fire emergency, Buffalo Blower offers a complete line of smoke and heat exhaust fans designed for stairwell pressurization.

Service stations require vehicle exhaust systems to maintain indoor air quality for customers and employees. These systems attach to a vehicle s exhaust pipe to draw hazardous emissions out of the building. The fans used in these systems are attached to small hose and must be capable of producing high pressures due to the air velocity required to exhaust the fumes. Tenderall Fan offers a wide selection of compact pressure blowers and radial bladed fans capable of meeting the high pressures requirements of vehicle exhaust systems.

For additional information please refer to http://tenderall.com/blower/index.htmlTenderall Fan Co.Industrial Fan and Blower Engineersnisco@globalserve.nethttp://www.tenderall.com/contact/index.htmlhttp://www.tenderall.com/hvac/index.html

Article Source:

ArticleRich.com

Christina Grimmie killed by ‘infatuated’ fan; Orlando police close case

December 14, 2016December 14, 2016 by

Friday, June 24, 2016

The man who murdered Christina Grimmie following a June 10 concert lived “like a hermit” and had apparently never met the singer, but was infatuated with her and had spent recent months changing his appearance in an effort to win her over, according to information released on Wednesday by police in Orlando, Florida.

Kevin James Loibl, age 27, took a taxicab to Orlando on June 9 from his St. Petersburg home, bringing along two 9mm Glock handguns and extra ammunition. He spent that night in a hotel. Following Grimmie’s June 10 performance at The Plaza Live, he approached her as she signed autographs and opened fire, shooting her in the head once and the torso three times. Grimmie’s brother Marcus then tackled Loibl, who broke free, backed against a wall, and killed himself with a single shot to the head.

Christina Grimmie was pronounced dead at Orlando Regional Medical Center just before 11:00 p.m. She was buried in a private ceremony in her hometown in New Jersey on June 16. A public memorial in nearby Medford attracted thousands of family, friends and fans.

Police interviewed several of Loibl’s co-workers including Cory Dennington, self-described as Loibl’s “only friend in the world”, who said Loibl had an unrealistic infatuation with her and was constantly watching her videos and monitoring her online activity. Dennington said Loibl had lost weight, whitened his teeth, and gotten eye and hair surgery in an effort to look better for Grimmie, whom he considered his “soul mate”. Loibl would get defensive when told hoping for a relationship with the singer was “illogical”.

Witnesses also said Loibl had not mentioned attending Grimmie’s Orlando concert, and none of them knew of any threats. His father and brother did not know Loibl owned any guns, police said. Each weapon was purchased legally at one of two St. Petersburg gun shops.

Investigators were unable to crack the encryption on Loibl’s phone, and it appeared he had destroyed his computer’s hard drive. Police believe Loibl acted alone and, since he is deceased, they closed their case on Wednesday. They offered no motive for the shooting.

Volunteers and food needed for flooded Manitoba, Canada

December 14, 2016December 14, 2016 by

Tuesday, March 31, 2009

Local municipal and provincial volunteers in Manitoba, Canada are exhausted in their efforts to divert the rising waters of the Red River of the North.

It has been hard work with little sleep for the residents who live on the shores of the Red River to shore up their defences with sandbags, build dikes, clear frozen culverts and break ice jams

Volunteers to spell relief for local volunteers and food are desperately needed.

“It’s a week now we’ve been doing this … you’re talking four, five, six public works guys. In my one community we’ve got 25 volunteer firefighters and those guys have been going 24/7, so of course it’s wearing them down.” said Paul Guyader, Manitoba’s emergency measures coordinator.

“We’re dealing with one of the biggest floods the province has ever seen,” said Steve Strang, mayor of St. Clements, Manitoba “We’ve put out hundreds of thousands of bags already. The municipalities are working very well, we’re working with the provincial government, we’ve brought in every possible resource we could to address this issue. The volunteerism within the community has been phenomenal.”

The Portage Diversion has taken some spring waters from the Assiniboine River and diverted the flow to Lake Manitoba.

Roseau River Anishinabe First Nation has been totally evacuated, as well as many homes near the Canada – United States border.

The cold weather is freezing the ice jams into place. Guyader has had 2 Amphibex Excavators operating on the river breaking up ice.

The Red River is right now 16.7 feet (5 metres) above spring ice conditions. The Red River Floodway gates cannot be opened with the current ice jams.

“If we operate now, we can get ice jamming going into the floodway, jamming up against the St. Mary’s bridge, as such, the floodway capacity would be reduced and would cause higher water levels in the city of Winnipeg.” said Steve Topping, Manitoba Water Stewardship spokesman

The floodway was constructed in 1968 following the 1950 flood to divert the overflow spring flooding waters of the Red River. The floodway has been widened the since the 1997 “flood of the century” and the expansion is expected to be completed this spring. As well Manitoba built permanent dikes around communities within the flood plain since the last two major floods..

The Red River waters will crest between the beginning of April to mid April, at which time also the weather should be warming up. Communities are bracing for higher water levels, more ice jams as well as melting snow in the warmer spring temperatures.

Distinct Uses Of Plastic Storage Containers}

December 11, 2016December 11, 2016 by

Click Here For More Specific Information On:

Distinct uses of plastic storage containers

Jaydon Harrison

[youtube]http://www.youtube.com/watch?v=27NWGu2ABdI[/youtube]

When you don’t want to haul heavy wooden boxes around and cardboard boxes just aren’t strong enough, turn to plastic storage containers for your solution. There isn’t much that can’t be stored in these kinds of units and your options are only limited by your imagination. Here are some of the most common uses for plastic storage containers and maybe some of the not-so-common ones as well.

The nice thing is you won’t have to worry about the container breaking down over time or rotting. Once your personal items are stored in a plastic container they are safe. Plastic storage containers are available in any style and size you need. They can also be found in unique shapes and colors. This means that they can be used to store any of your personal belongings including clothes, photos, odds and ends, and anything else that you need stored.

These plastic storage boxes are perfect for the workroom. You can purchase extremely small containers that will hold your nails, screws, nuts and bolts to keep them all organized. You can purchase medium size boxes for your tools and containers to keep your materials in. It would only take an afternoon to sort out a workroom that is in chaos and turn it into an organized workspace using plastic storage containers. How many people need some help organizing their bedrooms? Anything from clothing to shoes can be kept in these storage boxes and there are even containers that are specially made to fit under a bed. When the bedroom clutter is getting to be too much of a problem, plastic storage containers are the perfect solution.

Small plastic containers can be used to store food to prevent small bugs from invading them and to keep food fresh. Once the lid is put on a plastic container the food will be provided with an airtight environment and will be preserved longer. If you’re like most people, you don’t even remember what you have stored in your garage. Getting plastic storage containers gives you a good excuse to go through the stuff that you have in there so that it can be sorted and organized thoroughly. The nice thing about using these containers is they are easy to stack. In a garage that houses the family car, there may not be a lot of room for storage but by stacking boxes you’ll be able to make the best use of the limited space.

Article Source:

eArticlesOnline.com

}

Finnish police isolate ports in Helsinki

December 11, 2016December 11, 2016 by

Saturday, August 6, 2005

The Finnish police isolated the ports of Katajanokka and Länsisatama on Saturday. The ports were isolated at around 9.30 p.m. local time and the isolation was called off at around 11.30 p.m.

Finnish police received reports from Estonia that a shipping container loaded with explosives could be coming from Estonia Saturday evening. They checked every truck that passed the ports with the assistance of the Border Guard Service. There are still two ships due to arrive in Helsinki tonight, but they were already checked in Tallinn.

Oil spill hits Australia’s Sunshine coastline

December 11, 2016December 11, 2016 by

Sunday, March 15, 2009

200,000 litres of oil leaked into waters off the coast of Brisbane from the Pacific Adventurer when their fuel tanks were damaged in rough seas on Wednesday. The figure is about ten times higher than the original estimate of twenty thousand litres of oil. The devastating diesel oil spill has spread along 60 kilometres (37 miles) of the Queensland coast. In addition, 31 containers with 620 tonnes of ammonium nitrate fertiliser flew overboard during the violent storm.

Questions are being asked why the Hong Kong cargo ship was out in seas with nine meter waves caused by Cyclone Hamish, a Category 5 tropical cyclone, as well as why the fertiliser containers were not properly secured. One of the overboard containers ruptured the hull of the Pacific Adventurer, causing between 30 to 100 tonnes of oil to spew from the severely damaged ship.

If the ammonium nitrate mixes with the heavy oil, an explosion could occur. None of the containers have been recovered. Some of these may float, but it is believed that they may have sunk which then may cause algal blooms.

Disaster zones have been declared at Bribie and Moreton Islands, and along the Sunshine coast.

The vessel’s owner, Swire Shipping, reported that a second leak began on Friday, when the ship began listing after docking at Hamilton for repairs. “As full soundings of the vessel’s tanks were being taken at the port to determine how much oil had leaked from the vessel, a small quantity of fuel oil escaped from the Pacific Adventurer,” it stated. The ship was brought upright, and a recovery vessel was used to suck up the oil from the water. The leak produced a 500m-long oil slick down the Brisbane River. Booms were placed around this oil spill so that a skimmer could clean up the second spill.

Swire Shipping could face clean up costs of AU$100,000 a day as well as fines up to AU$1.5million (US$977,000; £703,000) if found guilty of environmental breaches or negligence.

Sunshine Coast beaches are slowly starting to be reopened. The beach of Mooloolaba was still closed following reports of burning sensations from swimmers. 12 beaches remain closed; however, 13 have been reopened.

Over 300 state government and council workers are using buckets, rakes and spades in the clean up effort. Sunshine Coast Mayor Bob Abbott says the majority will be gone by Sunday afternoon. The full environmental impact on wildlife is not yet known. One turtle and seven pelicans have been found covered in oil.

There are concerns that the drinking water of Moreton Island is at risk, as the island uses water from the underground water table near the oil spill site.

“Every bucketload of contaminated sand has to be removed from the island by barge, and each bucketload from a front-end loader weighs about one tonne. It’s just an impossible task,” said Mr Trevor Hassard of the Tangalooma Dolphin Education Centre.

The commercial fishing industry has suffered from the incident. Trawlers won’t resume operations until Sunday evening, and any catches will be tested for human consumption.